DMC 5AX-410

CNC High Speed 5 face Machining Center

Brand       : Detroit CNC

Model       : DMC 5AX410

send inquiry


DETROIT CNC’s VMCs are designed to feature maximum capacity and performance in the high precision as precision Mold & Die, Aero Space, Medical, aerospace, automotive and many other manufacturing sectors.


They are engineered a unique “C” frame design for an excellent platform, using high precision roller guides and heavy-duty pre-tensioned C2 class ball screws with cooling  for reliable accuracy on X/Y/Z Axes.


High precision Big Plus 40 with two face clamping for rigid machining and reduce tool wear. Positioning accuracy 0.0002”and repeatability 0.0002”. Precision hand scraping of each section assures near perfect alignment. Spindle, headstock, ball screws and motors are thermal cooling control to achieve consistent high accuracy with maximum reliability.


Features include all high-speed linear ways on all axes that ensure fast linear movement during cutting. All Meehanite cast iron construction with ribbed frame and wide stance machine base provide excellent support and damping character. All servo motors are direct coupled to ball screws. It increases sensitivity of movement; meanwhile, it reduces the backlash dramatically.


The powerful FANUC 0i-MF control has been used in this machine. There are more than $15,000 control package includes in this machine without extra charge. An Ethernet connection, USB, easy-access Flash memory card slot, coordinate rotation and scaling, helical interpolation, rigid tapping, spindle orientation, and conversational program are among the many standard features. The AICC II high speed-machining mode provides a 200-block look-ahead high-speed machining function. It is most powerful and valuable control in its class.


Table Size Ø16.1” (Ø410mm)
Max. Table Load 440lbs.
X Travel 22.0”
Y Travel 24.8”
Z Travel 21.3”
Z Travel range 0.8”-22.2”
Spindle Motor 18 HP
Spindle Speed 12,000rpm
Spindle Taper CAT-40 Big Plus
Rapids 1181 ipm
Cutting Feedrate 394 ipm
Linear Positioning Accuracy JIS B6338 ±0.00016”
Repeatability JIS B6338 ±0.0001”
A Axis -30 to +120degree, 11.1rpm
C Axis 360degree, 16.6rpm
Tool Capacity 30 tool fast arm type
Tool Shank CAT40 Big Plus
Maximum Tool Diameter w/o adjacent tool 5.9”
Maximum Tool Length 11.8”
Maximum Tool Weight 15lbs.
Tool Change Time Tool to tool: 2.5 secs
Chip to chip:4.5 secs
Tool Selection Random
Coolant Tank Capacity 105 gallons
Coolant Pump 1 HP
Max Coolant Pressure (Coolant Pump) 45psi
Max Coolant Flow Rate 18.5gpm
Power required 220V, 3 phases,30KVA
Air required 85psi, 200L/min
Floor Space (L x W X H) w/o cc 106” x 110” x 122”
Net Weight 17,700 lbs.


Fanuc 0-iMF CNC control
10.4” Color monitor

Fanuc Alpha Series Motors & drivers & Absolute Position Encoders

AICC II High speed machining mode w/ 200 Pre-read blocks

Tilted Working Plane function

12,000 rpm
Big Plus #40 spindle

Direct Drive Spindle

300psi Coolant through Spindle

18HP ( 13.2 kW ) spindle motor with 62ft-lb ( 84 Nm)

Spindle chiller

C2 Accuracy Ballscrew

Precision Roller Linear Guide;1-3/4” (45mm)

30+1 tool capacity swing arm type Automatic Tool Changers

Safety Vision Panels

Remote MPG

Coolant pump

Over Flow Coolant tank

Coolant Gun

Chip Flush System

Cutter Air Blast and Coolant Flush Beside Spindle

Spindle Circular Coolant Flushing

Chip Conveyor Auger Type with Chip Cart

30 pcs Pull studs

Work Light

Three Color Status Indicator Light

220volt / 3 phase / 60Hz electricity


AICCII Pre-read 400 Blocks, for Fanuc
15,000rpm Coupled Spindle, Japan Lube Oil Air Lubrication, Including Spindle

Oil Chiller, Thermal Control, Warm Up Running Procedure

Greeneco Mist Collector
Renishaw TS-27R Tool Setter
Renishaw NC4 Automatic Tool Setting and Breakage Detection
Renishaw OTS tool setting probe with OMI-2T receiver
Renishaw OMP-40 Part Probe and OTS Tool Probe with OMI-2T IR Receiver
Coolant through Spindle, Pressure up to 600PSİ



Go to Top