FA Series

5-Axis Bridge Type Machining Center

send inquiry


FA series, the first 5-axis bridge type CNC milling machining center of Vision Wide, was released in 2014, and it provided excellent 5-axis simultaneous accuracy performance for 5-axis machining in mold cutting, highly precise contour finishing, milling, drilling, and tapping.

Vision Wide manufactured the 5-axis machining center to shorten tool displacement travel and cutting process effectively, and to extend tool lifetime and offer the best choice for composite angle machining. FA series had excellent dynamic performance on XYZ axes and equipped high accuracy 2-axis head to achieve 5-axis simultaneous accuracy performance.

  • Structural rigidity was optimized by double column/bridge type structure design enabling wider machining range.
  • 5 axis dynamic rotation synchronization accuracy (TCPM) 0.04mm
  • Auto measurement compensation for rotation axis accuracy
  • Spindle vibration lower than 1 mm/sec
  • Auto measurement compensation for tool accuracy
  • Not affect by spindle thermal variation and environment temperature change, thermal elongation less than 0.02mm
  • Multi-axis synchronous head machining accuracy to meet the demand of parts processing


MODEL UNIT FA-3127 FA-4127 FA-3233 FA-4233 FA-5233 FA-6233 FA-8233
X axis mm 3,100 4,100 3,200 4,200 5,200 6,200 8,200
Y axis mm 2,700 3,300
Z axis mm 1,000/1,200(opt.) 1,000/1,200(opt.)
Table dimension mm 3,000×
Max. table load kg 10,000 12,000 13,000 16,000 20,000 22,000 24,000
Spindle motor
30 minutes rated)
kW 57/75 (34/43opt.) 57/75 (34/43opt.)
Spindle speed rpm 12,000 / 20,000(opt.) 12,000 / 20,000(opt.)
Spindle taper HSK-A100 /HSK-A63(opt.) HSK-A100 /HSK-A63(opt.)
Cutting feedrate mm/min 1-10,000 1-10,000
Rapid traverse m/min X:24 Y:18 Z:15 X:18 Y:18 Z:15 X:24 Y:15 Z:15 X:18 Y:15 Z:15 X:12.5 Y:15 Z:15 X:10 Y:15 Z:15 X:8 Y:15 Z:15
Positioning accuracy
(Refer to JIS B6333)
mm ±0.005/300, ±0.008/Full travel ±0.005/300, ±0.010/Full travel
(Refer to JIS B6333)
mm ±0.002 ±0.002 ±0.002
ATC capacity
Floor-standing type vertical tool change
pcs 24/32(opt.)/40(opt.) 24/32(opt.)/40(opt.)
Machine gross weight kg 35,500 38,500 51,000 58,000 65,000 72,000 86,000


Standard Accessory & Function

  1. HEIDENHAIN i-TNC530 controller
  2. Spindle 12,000rpm HSK-A100
  3. Blum TC 60 auto measurement compensation of rotation axis accuracy
  4. HIEDENHAIN DCM (Dynamic Collision Monitoring)
  5. 2-axis self-monitoring protection system:
    Spindle cutting vibration protection
    Spindle and motor overloading protection
    B/C rotating motor overloading protection
    Spindle overloading protected by software
  6. Spindle and structure environment temperature thermal compensation system
  7. Spindle cooling device
  8. Twin hydraulic cylinders with pressured air assistance balancing system
  9. X axis ball screw supporter(available for FA-xx33 and X>4m)
  10. 24 tools magazine with ATC
  11. Centralized auto lubrication system
  12. Independent lubrication oil collector
  13. Air blast through spindle
  14. Wash gun and pneumatic interface
  15. Spindle ring coolant nozzle
  16. Cutting fluid cooling system
  17. Enclosed sheet metal guard (without roof)
  18. Swiveling arm type operation panel
  19. Screw type chip conveyor on table side
  20. Caterpillar type chip conveyor
  21. Air conditioner for electrical cabinet
  22. Working lamp
  23. Operation cycle finish and alarm light
  24. Movable manual pulse generator
  25. Footswitch for tool clamping
  26. RJ45 interface
  27. XYZ axis linear scale feedback
  28. XYZ axis travel hard limits protection
  29. Remote monitoring software-standard (not available for Siemens controller)
  30. Auto power off function
  31. Foundation pads and bolts kits
  32. Adjustment tool and tool kits

Optional Accessory & Function

  1. Spindle 20,000rpm HSK-A63
  2. Z-axis travel 1200mm
  3. 200 higher column
  4. Sub working table
  5. Coolant through spindle system 20 bar
  6. Coolant through spindle 60 bar
  7. Reserved interface for coolant through spindle system
  8. Oil mist cooling device
  9. 32/ 40 tools magazine with ATC
  10. Overhead pendulum type operation panel
  11. Chip auger on table side
  12. Chip cart
  13. Independent manual pulse generator
  14. Remote monitoring software-professional (not available for Siemens controller)
  15. Auto tool length measurement
  16. Transformer
  17. Enclosed sheet metal guard with roof ( only for X < 4m , standard column height)
  18. Oil mist recycle device
  19. Oil skimmer
Go to Top