Specification
| Model | Description | FB70N | FB80N | FB90N | FB100N |
|---|---|---|---|---|---|
| Capacity | Swing over bed | 1800 mm (70.86″) | 2000 mm (78.74″) | 2250 mm (88.58″) | 2500 mm (98.4″) |
| Swing over cross slide (Full length) |
1240 mm (48.8”) | 1440 mm (56.6”) | 1690 mm (66.5”) | 1940 mm (76.3”) | |
| Swing over cross slide (Half length) |
1325 mm (52.1”) | 1510 mm (59.4”) | 1745 mm (68.7”) | 1985 mm (78.1”) | |
| Center height | 900 mm (35.4″) | 1000 mm (39.37″) | 1125 mm (44.2″) | 1250 mm (49.2″) | |
| Distance between center | 3000 mm (120″) ~12000 mm (480″) | ||||
| Bed width | 1345 mm (52.9″)/1575(62″) | ||||
| Spindle | Speed/Bore/Nose | 4 Steps 5 ~ 460 rpm / Ø 230 mm (9”) / A2-15 Opt. 4 Steps 4 – 300 rpm / Ø 260 mm (10.2”) / A2-20 |
|||
| Turret | Turret | H4 or V8 | |||
| Tool Size | H4: 50 x 50 mm V8: 32 × 32 mm | ||||
| X/Z axis travel Standard (Full length) cross slide |
1250 mm (49.2″) / 2600 ~ 11600 mm (102.36”~456.69”) | ||||
| X/Z axis travel (Half length) cross slide |
720 mm (28.35″) / 3000 ~ 12000 mm (118.11”~472.44”) | ||||
| X axis rapid travel ,Ball screw dia. |
5M / min, Ø 50 mm (1:2 Gear Box) | ||||
| Z axis rapid travel ,Ball screw dia. |
5M / min 3~4M (Ø 80 mm) 5~6M (Ø100 mm) 7~12M (Rack & Pinion Driver) | ||||
| Tailstock | Tailstock quill diameter | 290 mm (11.4″) | |||
| Tailstock quill travel | 300 mm (11.8″) | ||||
| Tailstock Center | MT 7 | ||||
| Motor | X axis servo motor | FANUC αiF22 4 kw | |||
| Z axis servo motor | FANUC αiF30 7.0 kw | ||||
| Spindle motor | FANUC αil50 45 / 55 kw | ||||
| Coolant pump motor | 1 kw | ||||
| Hydraulic pump motor | 7.5 kw | ||||
| Machine weight | 3000mm center distance | 33000 kgs | 34500 kgs | 36000 kgs | 37000 kgs |
| Each extra 1000 mm weight |
4500 kgs | ||||
Standard Accessories
- Fanuc control, motor & 6″ spindle bore (FA), 9″ (FB)
- Spindle oil chiller
- H4 or V8 hydraulic turret
- Auto coolant, hydraulic & lubrication system
- Splash guard
- Center, MT6 for tailstock
- Work light
- Hydraulic tailstock with rotating quill
- Chip conveyors (chain type for front & rear)
Optional Accessories
- Extra spindle bore, motor & speeds
- Chuck, Rear chuck adapter & Face plate
- C axis or spindle 5° indexing or 15° orientation
- Driving tool turret
- Driving toolholders
- Special boring bar toolholder
- Higher coolant pressure
- Twin turret
- Tool presetter
- Other controller
- Transformer (power supply except 220V)
- Steady rest & follow rest (Capacity, Hydraulic or Manual)
- Heavy duty milling attachment
- Y axis (with heavy duty milling attachment)
- Grinding head on turret or cross slide
- CE mark
