Flat Bed LA26 / LA30 / LA35 / LA40

Specification

Model	Description	LA 26	LA 30	LA 35	LA 40
Capacity	Swing over bed	660 mm (26″)	770 mm (30″)	890 mm (35″)	1000 mm (39″)
	Swing over cross slide	370 mm (14.5″)	480 mm (18.9″)	600 mm (23.6″)	700 mm (27.6”)
	Center height	330 mm (13″)	385 mm (15.1″)	445 mm (17.5″)	500 mm (19.7”)
	Distance between centers	1520 mm (60”), 2030 mm (80”), 3050 mm (120”), 4050 mm (159”), 5050 mm (199”), 6050 mm (238.2”)
	Bed width	480 mm (18.9″)
Spindle	Spindle bore Spindle nose Speed range	A2-11 (4″)		A2-11(6″)	A2-15 (9″) only for LA35 / 40
		L2: 22~90 rpm		22~90 rpm	12~51 rpm
		L1: 50~201 rpm		50~201 rpm	25~128 rpm
		H2: 156~624 rpm		156~624 rpm	99~276 rpm
		H1: 347~1200 rpm		347~860 rpm	137~700 rpm
	Spindle center	MT5
	Width of slide	280 mm (11”)
	Turret type	H4 or V8 Hydraulic
	Tool size	H4 or V8 25×25
	X axis travel	400 mm (15.7”)
	Z axis travel	1380 mm (54”), 1890 mm (74”), 2910 mm (115”), 3910 mm (154”), 4910 mm (193”) 5910 mm (154”)
	X axis rapid travel	5 M / min ø32 P5
	Z axis rapid travel	10 M / min ø50 P10
Tailstock	Quill diameter	Ø105 mm (4.1″), Opt. Rotating quill Ø145 mm (5.7″)
	Quill travel	200 mm (8″)
	Quill taper	MT6
Motor	X Axis servo motor	1.5M~4M FANUC α8i 1.6 kw, 5M~6M FANUC α12i 3.0 kw
	Z Axis servo motor	1.5M~4M FANUC α12i 3.0 kw, 5M~6M FANUC α22i 4.0 kw
	Spindle motor	FANUC “15i 15/18.5 kw, Opt. 18.5/22 kw
	Lubricant pump motor	25 W
	Coolant pump motor	0.455 kw
	Hydraulic pump motor	1 kw
Machine Weight	1500mm center distance	6250 kgs	6500 kgs	6950 kgs	7500 kgs
Machine Weight	Each extra 500mm weight	500 kgs