Specification
| Model | TK 1800N | TK 2000N | TK 2500N | |
|---|---|---|---|---|
| Capacity | Swing over bed | 1800 mm (70.86″) | 2000 mm (78.74″) | 2500 mm (98.42″) |
| Swing over cross slide (Full length) |
1350 mm (53.14″) | 1550 mm (61.02″) | 2050 mm (80.7″) | |
| Swing over cross slide (Half length) |
1530 mm (60.23″) | 1720 mm (67.71″) | 2200 mm (86.61″) | |
| Center height | 900 mm (35.43″) | 1000 mm (39.37″) | 1250 mm (49.21″) | |
| Between centers | 3000-12000 mm (120″-480″) | |||
| Bed width / Auxiliary guide | 1345 mm (52.95″) / 1550 mm (61.02″) | |||
| Headstock | Spindle bore, Dia. | Ø 230 mm (9″) | ||
| Spindle nose (Camlock) | A2-15 | |||
| Spindle speed (rpm), steps | 6-400 rpm | |||
| Spindle motor | 75 HP | |||
| Feed & Threads | Cross feed | 0.056-0.96 mm / rev(48 kinds) | ||
| Cross slide travel | 1250 mm (Full length) / 510mm (Half length) | |||
| Compound rest travel | X1: 250mm manual feeding / Z1: 400mm auto feeding | |||
| Tool size | 50 X 50 mm (2 x 2″) | |||
| Longitudinal feeds | 0.13 – 1.92 mm / rev (48 kinds) | |||
| Lead screw | Ø 60 mm x 2 TPI (Inch) or Ø 60 mm x 12 mm (Metric) | |||
| Threading range, Metric | 2-30 mm / pitch (48 kinds) | |||
| Threading range, Inch | 1 -15 TPI (48 kinds) | |||
| Module pitch threads | 1-15 M (32 kinds) | |||
| DP. Pitch threads | 2-30 P (48 kinds) | |||
| Tailstock | Quill Diameter | Ø 290 mm (11.4″) heavy duty rotating quill | ||
| Center taper | MT-7 | |||
| Quill travel | 300 mm (11.81″) | |||
| Miscellaneous | Rapid motor | 2HP | ||
| Coolant pump | 1HP | |||
| Lubrication pump | 12W | |||
| Machine weight (3 meter B. C.) |
28000 kgs | 29000 kgs | 30500 kgs | |
| Each extra 1000mm weight | 4500 kgs | |||
Standard Accessories
- Inch/metric dual gear box
- 4-way toolpost with T slot
- Work light
- Coolant system
- Thread chasing dial
- 6-way rapid travel
- Main motor with inverter
- Hydraulic spindle disk brake
- Magnetic brake for main spindle
- Auto lubrication system
- Electric motor for tailstock body movement
- Tailstock rotating quill
- Sleeve & centers
- Tool box with tools
- Manual
- Leveling bolts & pads
Optional Accessories
- Upgrade spindle bore
- Upgrade spindle motor
- Chuck or Face plate
- Adaptor for rear chuck
- Front chuck protection cover
- Rear chuck protection cover
- Boring bar tool holder (Full length cross slide only)
- Steady rest
- Follow rest
- Rear tool post
- Taper attachment (±10 degree, stroke 500mm)
- Movable rear splash guard
- Digital read out
- Heavy duty roller support bracket
- CE mark
