Conventional Precision Lathes
Heavy DutyTK960 / 1060 / 1200/ 1200N / 1400N / TK1600N
Enquiry about Heavy DutyTK960 / 1060 / 1200/ 1200N / 1400N / TK1600N
Enter the security code shown above
Specification
| Model | TK 960 | TK 1060 | TK 1200 | |
|---|---|---|---|---|
| Capacity
|
Swing over bed | 960 mm (37.7″) | 1060 mm (41.7″) | 1200 mm (47.2″) |
| Swing over cross slide | 650 mm (25.5″) | 750 mm (29.5″) | 890 mm (35″) | |
| Swing over gap | 1510 mm (59.4″) | 1610 mm (63.3″) | 1750 mm (68.8″) | |
| Center height | 480 mm (18.8″) | 530 mm (20.8″) | 600 mm (23.6″) | |
| Width of gap | 570 mm (22.4″) | |||
| Bed width / Auxiliary guide | 560 mm (22″) / 660 mm (25.9″) | |||
| Between centers | 2M, 3M, 4M, 5M, 6M, 7M,8M,9M,10M | |||
| Headstock | Spindle bore,dia. | Ø 156 mm (6″) [Opt. 230 mm (9″) ] |
Ø 156 mm (6″) [Opt. Ø 230 mm (9″) , Ø 310 mm (12″ ) Ø 360 mm (14″) ] |
|
| Spindle nose | A2-11 [Opt. A2-15] | A2-11 [Opt. A2-15, A2-20, A2-20] |
||
| Spindle speeds (rpm), 12steps | 9-600 [Opt. 6-400] | 9-600 [Opt. 6-400, 5-300, 5-300] |
||
| Main spindle motor | 20 HP (Opt. 25HP or 30HP) | |||
| Feed & Threads | Cross travel | 540 mm (21.2″) | ||
| Cross feeds | 0.065-0.96 mm / rev (48 kinds) | |||
| Longitudinal feeds | 0.13-1.92 mm / rev (48 kinds) | |||
| Lead screw diameter | Ø 50 mm (1.9″) x 2TPI | |||
| Threading range, Metric | 2-30 mm / pitch (44 kinds) | |||
| Threading range, Inch | 1-15 TPI (48 kinds) | |||
| Module pitch threads | 1-15 M (32 kinds) | |||
| DP. Pitch threads | 2-30 P (48 kinds) | |||
| Compound rest travel | 300 mm (11.8″) | |||
| Tool size | 40 x40 mm (1.5 x1.5″) | |||
| Rapid motor | 1/2HP | |||
| Tailstock | Quill Diameter | Ø 140 mm (5.5″) [Opt. bigger quill Diameter] | ||
| Center taper | MT6 | |||
| Quill travel | 300 mm (11.8″) | |||
| Miscellaneous | Coolant pump | 1/4 HP | ||
| Net Weight, Kgs | 5650 (2M), 6100 (3M), 7450 (4M), 8550 (5M), 9650 (6M),10750 (7M), 11850 (8M),12950 (9M),14050 (10M) |
|||
| Model | TK 1200N | TK 1400N | |
|---|---|---|---|
| Capacity
|
Swing over bed | 1200 mm (47.2″) | 1400 mm (55.1″”) |
| Swing over cross slide | 830 mm (32.6″) | 1030 mm (40.5″) | |
| Swing over gap | 1700 mm (66.9″) | 1900 mm (74.8″) | |
| Center height | 600 mm (23.6″) | 700 mm (27.5 “) | |
| Width of gap | 600 mm (23.6″) | ||
| Bed width / Auxiliary guide | 800 mm (31.4″) / 1000 mm (39.3″) | ||
| Between centers | 2M, 3M, 4M, 5M, 6M, 7M,8M,9M,10M,11M,12M,13M,14M | ||
| Headstock | Spindle bore,dia. | Ø 230 mm (9 “) [Opt. 310 mm (12″) , Ø 360 mm (14″ ) , Ø 535 mm (21″) , Ø 762 mm (30”)] |
|
| Spindle nose | A2-15 [Opt. A2-20, A2-28) ] |
||
| Spindle speeds (rpm), 12steps | 6-400 [Opt. 4-280, 3-200] |
||
| Main spindle motor | 30HP [Opt. 40HP or 50HP] | ||
| Feed & Threads | Cross travel | 800 mm (31.4″) | |
| Cross feeds | 0.065-0.96 mm / rev (48 kinds) | ||
| Longitudinal feeds | 0.13-1.92 mm / rev (48 kinds) | ||
| Lead screw diameter | 50 mm (1.9″) x 2 TPI | ||
| Threading range, Metric | 2-30 mm / pitch (44 kinds) | ||
| Threading range, Inch | 1-15 TPI (48 kinds) | ||
| Module pitch threads | 1-15 M (32 kinds) | ||
| DP. Pitch threads | 2-30 P (48 kinds) | ||
| Compound rest travel | 350 mm (13.7″) | ||
| Tool size | 50 x 50 mm (2 x2″) | ||
| Rapid motor | 1/2 HP | ||
| Tailstock | Quill Diameter | Ø 200 mm (7.87″) [Opt. Ø 290 mm (11.41″) rotating type] | |
| Center taper | MT7 | ||
| Quill travel | 300 mm (11.8″) | ||
| Miscellaneous | Coolant pump | 1/4 HP | |
| Net Weight, Kgs | 14650 (2M), 16550 (3M), 18700 (4M), 21000 (5M), 23300 (6M), 25650 (7M), 28000 (8M), 30700 (9M), 33400 (10M), 36100 (11M), 38800 (12M), 41500 (13M), 44200 (14M) |
||
| Model | TK 1600N | |
|---|---|---|
| Capacity | Swing over bed | 1600 mm (62.9″) |
| Swing over cross slide | 1230 mm (48.4″) | |
| Swing over gap | 2100 mm (82.6″) | |
| Center height | 800 mm (31.4″) | |
| Width of gap | 600 mm (23.6″) | |
| Bed width / Auxiliary guide | 800 mm (31.4″) / 1000 mm (39.3″) | |
| Between centers | 2M, 3M, 4M, 5M, 6M, 7M,8M,9M,10M,11M,12M,13M,14M | |
| Headstock | Spindle bore, Dia. | Ø 230 mm (9 “) [Opt. 310 mm (12″) , Ø 360 mm (14″ ) , Ø 535 mm (21″) , Ø 762 mm (30”)] |
| Spindle nose | A2-15 [Opt. A2-20, A2-28) ] |
|
| Spindle speeds (rpm), 12steps | 6-400 [Opt. 4-280, 3-200] |
|
| Main spindle motor | 30 HP [Opt. 40HP or 50HP] | |
| Feed & Threads | Cross travel | 800 mm (31.4″) |
| Cross feeds | 0.065-0.96 mm / rev (48 kinds) | |
| Longitudinal feeds | 0.13-1.92 mm / rev (48 kinds) | |
| Lead screw diameter | 50 mm (1.9″) x 2 TPI | |
| Threading range, Metric | 2-30 mm / pitch (44 kinds) | |
| Threading range, Inch | 1-15 TPI (48 kinds) | |
| Module pitch threads | 1-15 M (32 kinds) | |
| DP. Pitch threads | 2-30 P (48 kinds) | |
| Compound rest travel | 350 mm (13.7″) | |
| Tool size | 50 x 50 mm (2 x2″) | |
| Rapid motor | 1/2 HP | |
| Tailstock | Quill diameter | Ø 200 mm (7.87″) [Opt. Ø 290 mm (11.41″) rotating type] |
| Center taper | MT 7 | |
| Quill travel | 300 mm (11.8″) | |
| Miscellaneous | Coolant pump | 1/4 HP |
| Net Weight, Kgs | 14650 (2M), 16550 (3M), 18700 (4M), 21000 (5M), 23300 (6M), 25650 (7M), 28000 (8M), 30700 (9M), 33400 (10M), 36100 (11M), 38800 (12M), 41500 (13M), 44200 (14M) |
|
Standard Accessories
- Inch/metric dual gear box
- 4-ways toolpost with T slot
- Work light
- Coolant system
- Thread chasing dial
- Cross & longitudinal rapid travel
- Longitudinal bar with travel dogs (for carriage stop)
- Magnetic brake for main spindle
- Sleeve & centers
- Tool box with tools
- Manual
Optional Accessories
- Upgrade spindle bore
- Upgrade spindle motor
- Chuck or Face plate
- Adaptor for rear chuck
- Front chuck protection cover
- Rear chuck protection cover
- 4-position carriage stop
- Steady rest
- Follow rest
- Rear tool post
- Quick change tool post
- Boring bar tool holder
- Rapid threading attachment
- Auto feed on top slide
- Copy attachment (stroke 120mm)
- Taper attachment (±10 degree, stroke 500mm)
- Rotating center, MT7
- Full length rear splash guard (BC. 2M-5M)
- Movable rear splash guard
- CE mark
