Specification
Model | TKV-760 | TKV-760M | TKV-900 | TKV-900M | |
---|---|---|---|---|---|
Capacity | Max. swing diameter | 850 mm (33.4″) | 950 mm (37.4″) | ||
Max. turning diameter | 850 mm (33.4″) | 950 mm (37.4″) | |||
Distance from ram to table | 925 mm (36.4″) | ||||
Max. turning height | 650 mm (25.5″) | ||||
Max.workpiece weight | 1500 kgs | 2000 kgs | |||
Spindle | Table diameter (Manual chuck) |
610 mm (24″) | 800 mm (31.4″) | ||
Range of table speed | 5 – 700 rpm | 5 – 600 rpm | |||
Change gear speed | 2 Steps | – | 2 Steps | – | |
Spindle nose | A2 – 11 | ||||
Driving tool spindle speed | – | 50 – 2250 rpm | – | 50 – 2250 rpm | |
ATC | Number of tool station | 12 | |||
Tool size | 25 mm (0.9”), 32 mm (1.2”) | ||||
Cross-section of ram | 200 x 200 mm (7.8″x7.8″) |
220 x 220 mm (8.6″x8.6″) |
200 x 200 mm (7.8″x7.8″) |
220 x 220 mm (8.6″x8.6″) |
|
Feed | Rapid rate (X Axis) | 10 M/min | |||
Rapid rate (Z Axis) | 10 M/min | ||||
Horizontal travel (X Axis) | -100 + 650 mm (-3.9″+25.5″) | -100 + 750 mm (-3.9″ +29.5″) | |||
Vertical travel (Z Axis) | 600 mm (23.6″) | ||||
Cutting feed fate | 0.001 – 500 mm/rev | ||||
Feed override | 0 – 150 % | ||||
Cross – rail travel | Fixed | ||||
Cross – rail travel | Fanuc 0iTF | ||||
Motor | Spindle motor (Cont. / 30 min) |
18.5 / 22 kw | 30 / 37 kw | 18.5 / 22 kw | 30 / 37 kw |
Feed motor ( X / Z aixs) | 4 / 4 kw | ||||
Driving tool motor | – | AC 11 / 15 kw | – | AC 11 / 15 kw | |
Power requirement | 40 KVA | 55 KVA | 40 KVA | 55 KVA | |
Machine Size | Floor space (L x W) | 3450 x 3600 mm | 3450 x 3600 mm | ||
Max. height | 4500 mm | 4500 mm | |||
Net. weight | 12500 kgs | 13500 kgs |
Standard Accessories
- Spindle orientation
- Hydraulic 3-jaw solid chuck, cylinder & soft jaw x 1 set (For TKV-760, TKV-900 series)
- Hydraulic power unit
- Electric torque limitation
- Foot switch for hydraulic chuck
- Automatic lubrication system
- Coolant system through tool holder to inserts (3 bar)
- Coolant flushing system with tank
- Protection door
- Heat exchanger for electrical cabinet
- Full enclosed splash guard
- Work light
- Warning light ( R / Y / G )
- Workpiece counter
- Chain type chip conveyor & chip trolley
- Manual of operation & maintenance
- Manual of electrical & hydraulic circuit diagram
- Manual for controller
- Tool box with tool kits
- Leveling bolts & pads
Optional Accessories
- Higher power motor
- Extra hydraulic chuck & cylinder
- Dual speed gear box for driving tool spindle
- High & low pressure chucking
- Table with manual 4-jaw chuck
- Hard jaws of hydraulic chuck
- Manual guide i
- Hydraulic chuck & cylinder, diameter as spec
- Linear scale on X/Z axis
- Lubricant chiller for spindle bearing & gear
- Special tool holder
- Higher pressure coolant through turret (6 bar)
- Tool presetter with cover protection (Turning dia. is reduced)
- Tool arrangement
- Tool holder base
- Air conditioner for electrical cabinet
- Oil skimmer (Disk type)
- Scrap type chip conveyor with chip trolley
- Jig & fixture
- Turnkey project
- External power transformer
- CE mark