RC SERIES

RC SERIES

High-customization development

RC-180 Tons / RC-220 Tons / RC-280 Tons / RC-350 Tons / RC-450 Tons

Insisting on “Technology innovation and quality superiority” Victor Taichung is continuously devoted to develop and produce new model of Rc double color (V-type and L-type) with servo-drive plastic injection molding machine to satisfy customer’s energy
  • High Precision Injection Unit- Barbette type design
  • Rotary Table type of Injection Molding Machine
  • Special clamping unit mechanism design
send inquiry

RC-180T

Injection Unit
Injection model Y (VFII-Z) X (VFII-S) K (VFII-T-GE)
Calculated Injection Capacity in3 0.86 1.2 2.31 2.99 5.26 6.87 8.69
Actual shot weight-PS grams 13.2 18.6 35.6 46 81 105.8 134
Actual shot weight-PS oz 0.46 0.66 1.25 1.62 2.85 3.73 4.72
Plasticizing Capacity – PS g/s 20.7 34.6 52.2 74.9 92.5 135.3 185.8
Injection pressure-Max psi 46281 32812 45086 34917 37354 28574 22571
Injection rate (Rexroth) in3/sec 3.96 5.61 4.08 5.31 4.94 6.46 8.17
Injection speed (Rexroth) in3/sec 12.79 6.92 6.92
Screw diameter in 0.62 0.74 0.86 0.98 1.1 1.25 1.41
Screw L/D ratio 23.8 20 22.7 20 22.9 20 17.8
Screw speed rpm 400 400 375
Charging motor mm 80.5 100.5 200.9
PUMP (Rexroth) mm 75 75 75
Injection stroke in 2.75 3.93 5.51
Nozzle stroke in 8.07 7.87 9.64
Nozzle contact force ton 2.2 5.5 5.5
Total heating wattage kW 2.7 5.4 5.85
Clamping Unit
Clamping force ton 198
Clamping stroke-Max. in 18.5
Open daylight-Max. in 38.18
Mold thickness-Min./Max. in 3.93-19.68
Tie-Bar distance (H x V) in 28.34 x 16.14
Rotary table diameter in 29.52
Ejector stroke in 2.95
Ejector force ton 4.4
General
Servo motor (Rexroth) (kw) 13.4+13.4 13.4+13.4 13.4+13.4
Servo motor (Rexroth)-Option kw non non non
Oil tank capacity liters 323
Hydraulic sys. Pressure psi 2417
Machine weight ton
Machine dimension (LxWxH) in 203.1 x 81.2 x 86.9
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.

RC-220T

Injection Unit
Injection model X (VFII-S) K (VFII-T-GE) H (VFII-U-GE)
Calculated Injection Capacity in3 2.31 2.99 5.26 6.87 8.69 7.85 9.94 12.27
Actual shot weight-PS grams 35.6 46 81 105.8 134 120.6 152.6 188.5
Actual shot weight-PS oz 1.25 1.62 2.85 3.73 4.72 4.25 5.37 6.64
Plasticizing Capacity – PS g/s 52.2 74.9 92.5 135.3 185.8 114.8 157.6 209.8
Injection pressure-Max psi 45086 34917 37321 28574 22571 36894 29157 23610
Injection rate (Rexroth) in3/sec 4.08 5.31 4.94 6.46 8.17 6.46 8.17 10.13
Injection speed (Rexroth) in3/sec 6.92 5.19 5.19
Screw diameter in 0.86 0.98 1.1 1.25 1.41 1.25 1.41 1.57
Screw L/D ratio 22.7 20 22.9 20 17.8 22.5 20 18
Screw speed rpm 400 375 318
Charging motor mm 100.5 200.9 254
PUMP (Rexroth) mm 75 75 97
Injection stroke in 3.93 5.51 6.29
Nozzle stroke in 7.87 9.64 10.23
Nozzle contact force ton 5.5 5.5 5.5
Total heating wattage kW 5.4 5.85 6.83
Clamping Unit
Clamping force ton 242
Clamping stroke-Max. in 18.5
Open daylight-Max. in 38.18
Mold thickness-Min./Max. in 3.93-19.68
Tie-Bar distance (H x V) in 32.28×18.11
Rotary table diameter in 35.43
130 in 5.11
Ejector force ton 4.4
General
Servo motor (Rexroth) (kw) 13.4+13.4 13.4+13.4 15+15
Servo motor (Rexroth)-Option kw non non 18+18 Option
Oil tank capacity liters 323
Hydraulic sys. Pressure psi 2417
Machine weight ton
Machine dimension (LxWxH) in 219.6 x 86.2 x 90.9
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.

RC-280T

Injection Unit
Injection model K (VFII-T-GE) H (VFII-U-GE) G (VFII-W-GE)
Calculated Injection Capacity in3 5.26 6.87 8.69 7.85 9.94 12.27 15.33 20.28 25.91
Actual shot weight-PS grams 81 105.8 134 120.6 152.6 188.5 235.6 311.5 398.1
Actual shot weight-PS oz 2.85 3.73 4.72 4.25 5.37 6.64 8.29 10.97 14.02
Plasticizing Capacity – PS g/s 92.5 135.3 185.8 114.8 157.6 209.8 204.3 291.6 413.3
Injection pressure-Max psi 37321 28574 22571 36894 29157 23610 31774 24022 18802
Injection rate (Rexroth) in3/sec 4.94 6.46 8.17 6.46 8.17 10.13 9.27 12.26 15.68
Injection speed (Rexroth) in3/sec 5.19 5.19 4.76
Screw diameter in 1.1 1.25 1.41 1.25 1.41 1.57 1.57 1.81 2.04
Screw L/D ratio 22.9 20 17.8 22.5 20 18 23 20 17.7
Screw speed rpm 375 318 334
Charging motor mm 200.9 254 397
PUMP (Rexroth) mm 75 97 120
Injection stroke in 5.51 6.29 7.87
Nozzle stroke in 9.64 10.23 13.38
Nozzle contact force ton 5.5 5.5 5.5
Total heating wattage kW 5.85 6.83 8.07
Clamping Unit
Clamping force ton 308
Clamping stroke-Max. in 22.8
Open daylight-Max. in 44.48
Mold thickness-Min./Max. in 4.72-21.65
Tie-Bar distance (H x V) in 36.22×20.07
Rotary table diameter in 38.58
130 in 5.9
Ejector force ton 5.7
General
Servo motor (Rexroth) (kw) 13.4+13.4 15+15 18+18
Servo motor (Rexroth)-Option kw non 18+18 Option non
Oil tank capacity liters 323 531
Hydraulic sys. Pressure psi 2417
Machine weight ton
Machine dimension (LxWxH) in 231.1 x 92x 93.5
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.

RC-350T

Injection Unit
Injection model H (VFII-U-GE) G (VFII-W-GE) F (VFII-X-GE)
Calculated Injection Capacity in3 7.85 9.94 12.27 15.33 20.28 25.91 22.31 28.51 37.95
Actual shot weight-PS grams 120.6 152.6 188.5 235.6 311.5 398.1 343.7 437.9 583
Actual shot weight-PS oz 4.25 5.37 6.64 8.29 10.97 14.02 12.07 15.42 20.53
Plasticizing Capacity – PS g/s 114.8 157.6 209.8 204.3 291.6 413.3 287.4 385.5 529.3
Injection pressure-Max psi 36894 29157 23610 31774 24022 18802 31489 24634 18504
Injection rate (Rexroth) in3/sec 6.46 8.17 10.13 9.27 12.26 15.68 11.71 14.95 19.95
Injection speed (Rexroth) in3/sec 5.19 4.76 4.56
Screw diameter in 1.25 1.41 1.57 1.57 1.81 2.04 1.81 2.04 2.36
Screw L/D ratio 22.5 20 18 23 20 17.7 22.6 20 17.3
Screw speed rpm 318 334 297
Charging motor mm 254 397 683
PUMP (Rexroth) mm 97 120 150
Injection stroke in 6.29 7.87 8.66
Nozzle stroke in 10.23 13.38 14.96
Nozzle contact force ton 5.5 5.5 5.5
Total heating wattage kW 6.83 8.07 12.95
Clamping Unit
Clamping force ton 385
Clamping stroke-Max. in 25.9
Open daylight-Max. in 51.57
Mold thickness-Min./Max. in 4.72-25.59
Tie-Bar distance (H x V) in 40.15×22.04
Rotary table diameter in 45.66
130 in 7.08
Ejector force ton 5.7
General
Servo motor (Rexroth) (kw) 15+15 18+18 18+22.5 (G+F)
Servo motor (Rexroth)-Option kw 18+18 Option non 22.5+22.5 (F+F)
Oil tank capacity liters 323 531 676
Hydraulic sys. Pressure psi 2417
Machine weight ton
Machine dimension (LxWxH) in
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.

RC-450T

Injection Unit
Injection model H (VFII-U-GE) G (VFII-W-GE) F (VFII-X-GE)
Calculated Injection Capacity in3 7.85 9.94 12.27 15.33 20.28 25.91 22.31 28.51 37.95
Actual shot weight-PS grams 120.6 152.6 188.5 235.6 311.5 398.1 343.7 437.9 583
Actual shot weight-PS oz 4.25 5.37 6.64 8.29 10.97 14.02 12.07 15.42 20.53
Plasticizing Capacity – PS g/s 114.8 157.6 209.8 204.3 291.6 413.3 287.4 385.5 529.3
Injection pressure-Max psi 36894 29157 23610 31774 24022 18802 31489 24634 18504
Injection rate (Rexroth) in3/sec 6.46 8.17 1013 9.27 12.26 15.68 11.71 14.95 19.95
Injection speed (Rexroth) in3/sec 5.19 4.76 4.56
Screw diameter in 1.25 1.41 1.57 1.57 1.81 2.04 1.81 2.04 2.36
Screw L/D ratio 22.5 20 18 23 20 17.7 22.6 20 17.3
Screw speed rpm 318 334 297
Charging motor mm 254 397 683
PUMP (Rexroth) mm 97 120 150
Injection stroke in 6.29 7.87 8.66
Nozzle stroke in 10.23 13.38 14.96
Nozzle contact force ton 5.5 5.5 5.5
Total heating wattage kW 6.83 8.07 12.95
Clamping Unit
Clamping force ton 496
Clamping stroke-Max. in 29.9
Open daylight-Max. in 57.48
Mold thickness-Min./Max. in 6.29-27.55
Tie-Bar distance (H x V) in 44.09 x 24.01
Rotary table diameter in 48.81
130 in 7.08
Ejector force ton 9.3
General
Servo motor (Rexroth) (kw) 15+15 18+18 18+22.5 (G+F)
Servo motor (Rexroth)-Option kw 18+18 Option non 22.5+22.5 (F+F)
Oil tank capacity liters 531 531 676
Hydraulic sys. Pressure psi 2417
Machine weight ton
Machine dimension (LxWxH) in
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.
Go to Top