Specification
| MODEL | S-205N | S-206 | |
|---|---|---|---|
| Machining capacity | Bar stock diameter at main spindle | 3-20 | |
| Max. bar diameter at back spindle | 20 | ||
| Max. machining length | 170 mm (Direct motor-driven guide bushing) 80 mm (Mechanical-driven guide bushing) 250 mm (Fixed guide bushing) 45 mm (Guide bushing-less) |
210 mm (Direct motor-driven guide bushing) 80 mm (Mechanical-driven guide bushing) 250 mm (Fixed guide bushing) 46 mm (Guide bushing-less) |
|
| Max. drilling / tapping diameter of main spindle | Dia. 10 mm / M8 | Dia. 10 mm / M8 | |
| Deep hole drilling | ━ | Dia. 8 mm | |
| Max. drilling / tapping diameter of sub spindle | Dia. 8 mm / M6 | Dia. 8 mm / M6 | |
| Max. drilling / tapping diameter of cross tool | Dia. 6 mm / M5 | L side: Dia. 6 mm / M5 ; R side: Dia. 8 mm / M6 |
|
| Max. drilling / tapping diameter of back tool | Dia. 6 mm / M5 | Dia. 6 mm / M5 | |
| Max. mountable slitting saw | Dia. 30 mm | Dia. 30 mm | |
| Speed | Main spindle | 200-10000 min-1 | 200-12000 min-1 |
| Back spindle | 200-12000 min-1 | 200-12000 min-1 | |
| Rotary guide bushing | 200-10000 min-1 (Motor direct-drive) 200-8000 min-1 (Mechanical-drive) |
200-12000 min-1 (Motor direct-drive) 200-8000 min-1 (Mechanical-drive) |
|
| Cross / Back tool | 200-5000 min-1 | 200-8000 min-1 | |
| Tool | Mountable tool number | 21 | 28 (Std) / 39 (Max.) |
| OD tool shank | 12 x 12 x 85 mm | 12 x 12 x 100 mm | |
| ID tool shank | Dia. 20 mm | Dia. 22 mm | |
| Chuck of cross live tool | ER11 x 2 ; ER16 x 2 |
L side: ER11 x 2, ER16 x 1 R side: ER16 x 2 (Opt.) |
|
| Chuck of back live tool | ER11 x 2 | ER16 x 4 (Opt.) | |
| Chuck of back fixed tool | ER16 | ER 16 | |
| Chuck of deep hole drill | – | ER 16 | |
| OD tool number | 5 | 5 | |
| Face fixed ID tool | 4 | 5 | |
| Back fixed ID tool | 4 (Mounted at face / back ID tool post) + 2 (mounted at independent back tool post) |
5 | |
| Cross live tool | 4 | 4 | |
| Back live tool | 2 | 4 (Fix) + 4 (Live) | |
| Face deep drill tool | ━ | 2 | |
| Rapid feed rate | 30 M / min (X: 24 M / min) | 30 M / min (X: 24 M / min) | |
| Motor | Main spindle motor | 2.2 / 3.7 Kw (Con. / 15 min) | 2.2 / 3.7 Kw (Con. / 15 min) |
| Back spindle motor | 1.5 / 2.2 Kw (Con. / 15 min) | 1.5 / 2.2 Kw (Con. / 15 min) | |
| Cross tool motor | 0.5 Kw | L side: 0.75 Kw ; R side: 1 Kw |
|
| Back tool motor | 0.5 Kw | 1 Kw | |
| Direct drive rotary guide bushing | 0.75 / 1.1 Kw (Con. / 10 min) | 0.75 / 1.1 Kw (Con. / 10 min) | |
| Axes motor | X1, Y1, Z1, X2, Z2 – 0.5 Kw | X1, Y2, Z1, X2, Z2 – 0.5 Kw ; Y1 – 0.75 Kw |
|
| Coolant pump | 0.75 Kw | 0.75 Kw | |
| Lubrication pump | 0.011Kw | 0.011Kw | |
| Hydraulic pump | – | – | |
| Spindle cooling oil pump | 0.19 Kw | 0.19 Kw | |
| Axes travel | X1 | 42 mm | 124 mm |
| Y1 | 161 mm | 280 mm | |
| Z1 | 250 mm | 290 mm | |
| X2 | 200 mm | 340 mm | |
| Y2 | – | 60 mm | |
| Z2 | 170 mm | 300 mm | |
| Miscellaneous | Machine weight | 1700 Kgs | 3700 Kgs |
| Power source requirement | 11 KVA | 14.3 KVA | |
| Compressed air requirement | ≧ 4 kg / cm2 | ≧ 4 kg / cm2 | |
| Air consumption | ≧ 30 NL / min | ≧ 30 NL / min | |
| Coolant tank capacity | 115 L | 180 L | |
| Machine size | 1640 x 1080 x 1700 mm | 2300 x 1400 x 2000 mm | |
| MODEL | S-265 | S-325 | |
|---|---|---|---|
| Machining capacity | Bar stock diameter at main spindle | 8-26 | 8-32 |
| Max. bar diameter at back spindle | 26 | 32 | |
| Max. machining length | 320 mm (Direct motor-driven guide bushing) 50 mm(Guide bushing-less) |
320 mm (Direct motor-driven guide bushing) 50 mm(Guide bushing-less) |
|
| Max. drilling / tapping diameter of main spindle | Dia. 12 mm / M10 | Dia. 12 mm / M10 | |
| Deep hole drilling | Dia. 10 mm | Dia. 10 mm | |
| Max. drilling / tapping diameter of sub spindle | Dia.10 mm / M8 | Dia. 10 mm / M8 | |
| Max. drilling / tapping diameter of cross tool | L side: Dia. 8 mm / M6 ; R side: Dia. 8 mm / M6 |
L side: Dia. 8 mm / M6 ; R side: Dia. 8 mm / M6 |
|
| Max. drilling / tapping diameter of back tool | Dia. 8 mm / M6 | Dia. 8 mm / M6 | |
| Max. mountable slitting saw | Dia. 45 mm | Dia. 45 mm | |
| Speed | Main spindle | 200-10000 min-1 | 200-8000 min-1 |
| Back spindle | 200-10000 min-1 | 200-8000 min-1 | |
| Rotary guide bushing | 200-10000 min-1 (Motor direct-drive) | 200-8000 min-1 (Motor direct-drive) | |
| Cross / Back tool | 200-6000 min-1 (Standard: 4800 min-1) | 200-6000 min-1 (Standard: 4800 min-1) | |
| Tool | Mountable tool number | 27 (Std) / 39 (Max.) | 27 (Std) / 39 (Max.) |
| OD tool shank | 16 x 16 x 100 mm | 16 x 16 x 100 mm | |
| ID tool shank | Dia. 25 mm | Dia. 25 mm | |
| Chuck of cross live tool | L side: ER16 x 3, ER20 x 1 R side: ER16 |
L side: ER16 x 3, ER20 x 1 R side: ER16 |
|
| Chuck of back live tool | ER16 | ER16 | |
| Chuck of back fixed tool | ER16 (Opt. ER20) | ER16 (Opt. ER20) | |
| Chuck of deep hole drill | ER16 | ER16 | |
| OD tool number | L: 5 ; R: 7 |
L: 5 ; R: 7 |
|
| Face fixed ID tool | 5 | 5 | |
| Back fixed ID tool | 5 | 5 | |
| Cross live tool | L side cross live tool: 4 ; R side cross live: 3 |
L side cross live tool: 4 ; R side cross live: 3 |
|
| Back live tool | 4 | 4 | |
| Face deep drill tool | 2 | 2 | |
| Rapid feed rate | 30 M / min (X: 24 M / min) | 30 M / min (X: 24 M / min) | |
| Motor | Main spindle motor | 3.7 / 7.5 Kw (Con. / 10 min) | 3.7 / 7.5 Kw (Con. / 10 min) |
| Back spindle motor | 2.2 / 3.7 Kw (Con. / 10 min) | 2.2 / 3.7 Kw (Con. / 10 min) | |
| Cross tool motor | 1 Kw | 1 Kw | |
| Back tool motor | 1 Kw | 1 Kw | |
| Direct drive rotary guide bushing | 2.2 / 3.7 Kw (Con. / 10 min) | 2.2 / 3.7 Kw (Con. / 10 min) | |
| Axes motor | X1, Y1, Z1, X2, Z2 – 0.75 Kw | X1, Y1, Z1, X2, Z2 – 0.75 Kw | |
| Coolant pump | 0.75 Kw | 0.75 Kw | |
| Lubrication pump | 0.011Kw | 0.011Kw | |
| Hydraulic pump | – | 0.75 Kw | |
| Spindle cooling oil pump | 0.19 Kw | 0.19 Kw | |
| Axes travel | X1 | 142 mm | 142 mm |
| Y1 | 348 mm | 348 mm | |
| Z1 | 320 mm | 320 mm | |
| X2 | 370 mm | 370 mm | |
| Y2 | ━ | ━ | |
| Z2 | 335 mm | 335 mm | |
| Miscellaneous | Machine weight | 3500 Kgs | 3500 Kgs |
| Power source requirement | 21.4 KVA | 22.5 KVA | |
| Compressed air requirement | ≧ 4 kg / cm2 | ≧ 4 kg / cm2 | |
| Air consumption | ≧ 100 NL / min | ≧ 100 NL / min | |
| Coolant tank capacity | 180 L | 180 L | |
| Machine size | 2150 x 1280 x 1930 mm | 2150 x 1280 x 1930 mm | |
Standard Accessories
- Main and back spindle sleeve (for round bar machining)
- Door interlock
- Coolant flow switch
- Spindle cooling unit
- Work catcher and work box
- Automatic power shut-off
- Back spindle air purge
- Manual pulse generator
- Bar feeder interface
- USB port / CF card port / RS232 port / Ethernet port
- Software cut-off check
- Guide bush-less holder
- Long part discharge
- Work light and 3 tiered warning lamp set
- Tool box with tools and manuals
Optional Accessories
- Hydraulic magazine type bar feeder
- Oil mist collector
- Thread whirling attachment
- High pressure coolant system
- Chip conveyor with bucket
- CE mark
- Transformer
