Specification
| Model | Description | TNC460 / 460L | TNC460A | TNC530 / 530L |
|---|---|---|---|---|
| Capacity | Swing over bed |
460 mm (18″) |
530 mm (20.9″) | |
| Swing over cross slide |
240 mm (9.4″) |
300 mm (9.4″) | ||
| Center height |
230 mm (9″) |
265 mm (10.4″) | ||
| Distance between center | 1000 mm (40″), 1500 mm (60″) |
1000 mm (40″) | 1000 mm (44″), 1500 mm (60″) |
|
| Bed width |
350mm (13.8″) |
350mm (13.8″) | ||
| Spindle | Soindle nose | A1-6 or D1-6 | A1-6 | A1-8 or D1-8 |
| Spindle speed (4 steps) | H1:961-2500 rpm H2:341-960 rpm L1:131-340 rpm L2:50-130 rpm |
H:341-2500 rpm L:50-340 rpm |
H1:621-1600 rpm H2:210-620 rpm L1:91-240 rpm L2:35-90 rpm |
|
| Spindle bore |
52mm (2″) |
80 mm (3.2″) | ||
| Chuck size | 8″(OPT) | 8″ | 10″(OPT) | |
| Turret | Longitudinal travel (Z axis) |
895 mm (35.2″), 1415 mm (55.7″) |
890 mm (35.2″) | 895 mm (35.2″), 1415 mm (55.7″) |
| Crosslide travel (X axis) |
280 mm (11″) |
300 mm (11.8″) | ||
| Cross slide width |
220 mm (8.6″) |
220 mm (8.6″) | ||
| Size of toolpost shank |
25 mm x 25 mm (1″x1″) |
25 mm x 25mm (1″x1″) | ||
| X axis rapid travel |
5 M / min. (200 ipm) |
5 M / min. (200 ipm) | ||
| Z axis rapid travel |
10 M / min. (400 ipm) |
10 M / min. (400 ipm) | ||
| Tailstock | Tailstock diameter |
65 mm (2.5″) |
65 mm (2.5″) | |
| Tailstock travel |
150 mm (6″) |
150 mm (6″) | ||
| Tailstock taper |
MT5 |
MT5 | ||
| Motor | Spindle motor | 7.5HP/10HP(OPT) | 10HP | 10HP/15HP(OPT) |
| Drives (X,Z) |
AC SERVO |
AC SERVO | ||
| Range of feeds in manual mode |
0.01-500 m/rev. |
0.01-500 m/rev. (0.0004-19.68 in/rev.) |
||
| Coolant pump motor |
1/4 HP |
1/4 HP | ||
| Machine Weight | Machine Weight | 2270 kgs , 2724 kgs |
2000 kgs | 3000 kgs , 3500 kgs |
Standard Accessories
- Auto lubrication and coolant system
- Fagor spindle motor (Only for TNC460A)
- Auto 2 steps speed change (Only for TNC460A)
- 8″ 3-jaw manual chuck (Only for TNC460A)
- 4 stations electric turret (Only for TNC460A)
- Rear splash guard with two slide front doors
One slide front door for TNC460A - Work light
- Spindle sleeve
- Two dead centers
- Tool box with tools
- Manuals
Optional Accessories
- Extra spindle bore and motor
- Hydraulic / manual chuck
- Face plate
- Steady rest
- Follow rest
- Rotation center
- Hydraulic tailstock
- 4 position manual tool post
- Quick change toolpost
- 4 stations electric turret
- 8 stations hydraulic turret
- Chip conveyor
- CE mark
- Transformer
