VsP-SERIES

VsP-SERIES

Hydraulic Clamping Injection Moulding Machines

VsP-60 Tons / VsP-90 Tons / VsP-120 Tons / VsP-150 Tons / VsP-180 Tons / VsP-220 Tons / VsP-260 Tons

With a powerful V8800 controller and high efficient gear pump driven by P.M. Synchronous to satisfy your energy saving requirement and achieves the outstanding process consistency and repeatability.

Victor Taichung VsP Series injection moulding machine has been developed by fusing of merit of hydraulic injection machines (low maintenance free operation, long life, and low cost)and electric molding machines (energy-saving, high-velocity injection, quick response. high repeatability, and low operation noise)

The innovative new servo motor with high efficient gear pump system, achieves energy saving operation and quick response equivalent to those of all electric injection molding machines.

  • Energy saving almost equivalent to all electric model machine.
  • Quick response injection response time (Standard mode).
  • Stability in low velocity/low pressure & wide range injection velocity: From ultra-low to high velocity range.
  • Linearity Excellent linearity in both injection velocity and injection pressure.
  • Excellent injection holding pressure performance Capability in sustaining high injection holding pressure longer (as compared with full electric machine).
  • Reduction in the amount of hydraulic oil and cooling water volume.
  • Silent (Low noise gear pump operation) almost equivalent to all electric injection molding machine.
send inquiry

VsP-60

Injection Unit
Injection unit size S K
Screw Diameter in 0.86 0.98 1.1 1.25 1.41
Calculated Injection Capacity in³ 2.31 2.99 3.78 4.88 6.22
Actual Shot weight-PS g 36 46 58 75 95
oz 1.3 1.6 2.0 2.7 3.4
Actual Plasticzing Capacity-PS g/s 5.55 8.05 10.00 14.44 19.72
Actual Plasticzing Capacity-PS kg/hr 20.00 29.00 36.00 52.00 71.00
Injection Pressure-Max. Psi 35557 33168 35557 28687 22671
Injection rate in³/sec 3.17 4.08 5.06 6.65 8.42
Calculated Injection Speed-Max. in/sec 5.35 5.35
L/D ratio 22.7 20 22.9 20 17.8
Screw Speed rpm 400 375
Screw stroke in 3.937 3.937
Calculated Nozzle contact force U.S. ton 5.5 5.5
Total Heating wattage kw 7.2 10.35
Clamping unit
Clamping Force U.S. ton 66.1
Tie-Bar distance (HxV) in 12.2 x 12.2
Mold thickness Min. – Max. in 5.9 – 12.59
Clamp stroke-Max. in 10.629
Open daylight-Max. in 23.228
Platen dimensions (HxV) in 19.2 x 18.1
Ejector stroke in 3.149
Ejector force U.S. ton 4.409
Dry. Cycle time sec. 2.6
General
Motor (Standard) HP/ (kw) 20 / (15)
Servo Motor Pump (YUKEN ES) kw 16(M)/18.5(D)
Oil tank capacity L 150
Hydraulic sys. Pressure Psi 2417
Machine weight U.S. ton 2.535
Machine size (LxWxH) in 152.59 x 43.11 x 75.51
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.

VsP-90

Injection Unit
Injection unit size S K M
Screw Diameter in 0.86 0.98 1.1 1.25 1.41 1.25 1.41 1.57
Calculated Injection Capacity in³ 2.31 2.99 3.78 4.88 6.22 7.14 9.03 11.1
Actual Shot weight-PS g 36 46 58 75 95 109 138 171
oz 1.3 1.6 2.0 2.7 3.4 3.8 4.9 6.0
Actual Plasticzing Capacity-PS g/s 5.55 8.05 10.00 14.44 19.72 11.11 15.00 20.00
Actual Plasticzing Capacity-PS kg/hr 20.00 29.00 36.00 52.00 71.00 40.00 54.00 72.00
Injection Pressure-Max. Psi 35557 33168 35557 28687 22671 35415 27976 22657
Injection rate in³/sec 3.90 5.06 6.34 8.29 10.49 6.71 8.54 10.49
Calculated Injection Speed-Max. in/sec 6.65 6.65 5.39
L/D ratio 22.7 20 22.9 20 17.8 22.5 20 18
Screw Speed rpm 400 375 285
Screw stroke in 3.937 3.937 5.7
Calculated Nozzle contact force U.S. ton 5.5 5.5 5.5
Total Heating wattage kw 7.2 10.35 11.43
Clamping unit
Clamping Force U.S. ton 99.2
Tie-Bar distance (HxV) in 14.1 x 14.1
Mold thickness Min. – Max. in 5.9 – 13.77
Clamp stroke-Max. in 12.598
Open daylight-Max. in 26.377
Platen dimensions (HxV) in 22.0 x 21.2
Ejector stroke in 3.937
Ejector force U.S. ton 4.409
Dry. Cycle time sec. 2.5
General
Motor (Standard) HP/ (kw) 25 / (18.5)
Servo Motor Pump (YUKEN ES) kw 16(M)/22(D)
Oil tank capacity L 165
Hydraulic sys. Pressure Psi 2417
Machine weight U.S. ton 3.086
Machine size (LxWxH) in 162.28 x 49.8 x 75.91
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.

VsP-120

Injection Unit
Injection unit size K M
Screw Diameter in 1.1 1.25 1.41 1.25 1.41 1.57
Calculated Injection Capacity in³ 3.78 4.88 6.22 7.14 9.03 11.1
Actual Shot weight-PS g 58 75 95 109 138 171
oz 2.0 2.7 3.4 3.8 4.9 6.0
Actual Plasticzing Capacity-PS g/s 10.00 14.44 19.72 11.11 15.00 20.00
Actual Plasticzing Capacity-PS kg/hr 36.00 52.00 71.00 40.00 54.00 72.00
Injection Pressure-Max. Psi 35557 28687 22671 35415 27976 22657
Injection rate in³/sec 6.34 8.29 10.49 6.71 8.54 10.49
Calculated Injection Speed-Max. in/sec 6.65 5.15
L/D ratio 22.9 20 17.8 22.5 20 18
Screw Speed rpm 375 285
Screw stroke in 3.937 5.708
Calculated Nozzle contact force U.S. ton 5.5 5.5
Total Heating wattage kw 10.35 11.43
Clamping unit
Clamping Force U.S. ton 132.2
Tie-Bar distance (HxV) in 16.1 x 16.1
Mold thickness Min. – Max. in 5.9 – 16.92
Clamp stroke-Max. in 14.173
Open daylight-Max. in 31.102
Platen dimensions (HxV) in 23.6 x 22.8
Ejector stroke in 3.937
Ejector force U.S. ton 4.409
Dry. Cycle time sec. 3.2
General
Motor (Standard) HP/ (kw) 25 / (18.5)
Servo Motor Pump (YUKEN ES) kw 16(M)/22(D)
Oil tank capacity L 165
Hydraulic sys. Pressure Psi 2417
Machine weight U.S. ton 3.747
Machine size (LxWxH) in 171.18 x 48.46 x 78.74
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.

VsP-150

Injection Unit
Injection unit size M G
Screw Diameter in 1.25 1.41 1.57 1.41 1.57 1.81
Calculated Injection Capacity in³ 7.14 9.03 11.1 9.94 12.2 16.2
Actual Shot weight-PS g 109 138 171 153 188 249
oz 3.8 4.9 6.0 5.4 6.6 8.8
Actual Plasticzing Capacity-PS g/s 13.61 18.88 25.00 16.11 21.38 31.66
Actual Plasticzing Capacity-PS kg/hr 49.00 68.00 90.00 58.00 77.00 114.00
Injection Pressure-Max. Psi 35415 27976 22657 30949 27976 21149
Injection rate in³/sec 8.42 10.67 13.18 8.60 10.67 14.09
Calculated Injection Speed-Max. in/sec 6.77 5.47
L/D ratio 22.5 20 18 22.2 20 17.4
Screw Speed rpm 357 305
Screw stroke in 5.708 6.299
Calculated Nozzle contact force U.S. ton 5.5 5.5
Total Heating wattage kw 11.43 13.9
Clamping unit
Clamping Force U.S. ton 165.3
Tie-Bar distance (HxV) in 18.1 x 18.1
Mold thickness Min. – Max. in 5.9 – 17.71
Clamp stroke-Max. in 15.748
Open daylight-Max. in 33.464
Platen dimensions (HxV) in 27.1 x 25.98
Ejector stroke in 3.937
Ejector force U.S. ton 4.409
Dry. Cycle time sec. 3.1
General
Motor (Standard) HP/ (kw) 30 / (22)
Servo Motor Pump (YUKEN ES) kw 20(M)/30(D)
Oil tank capacity L 215
Hydraulic sys. Pressure Psi 2417
Machine weight U.S. ton 4.409
Machine size (LxWxH) in 175.82 x 50.39 x 81.57
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.

VsP-180

Injection Unit
Injection unit size G F
Screw Diameter in 14.1 1.57 1.81 1.81 1.96 2.16
Calculated Injection Capacity in³ 9.94 12.2 16.2 20.2 23.9 28.9
Actual Shot weight-PS g 153 188 249 312 368 445
oz 5.4 6.6 8.8 11.0 13.0 15.7
Actual Plasticzing Capacity-PS g/s 20.55 27.50 40.27 26.94 33.61 41.66
Actual Plasticzing Capacity-PS kg/hr 74.00 99.00 145.00 97.00 121.00 150.00
Injection Pressure-Max. Psi 30991 27976 21149 32001 27080 22387
Injection rate in³/sec 11.04 13.67 18.06 11.90 14.09 17.02
Calculated Injection Speed-Max. in/sec 7 4.64
L/D ratio 22.2 20 17.4 21.7 20 18.2
Screw Speed rpm 391 261
Screw stroke in 6.299 7.874
Calculated Nozzle contact force U.S. ton 5.5 5.5
Total Heating wattage kw 13.9 22.6
Clamping unit
Clamping Force U.S. ton 198.4
Tie-Bar distance (HxV) in 20 x 20
Mold thickness Min. – Max. in 7.87 – 21.65
Clamp stroke-Max. in 18.503
Open daylight-Max. in 40.157
Platen dimensions (HxV) in 29.52 x 28.5
Ejector stroke in 5.511
Ejector force U.S. ton 6.172
Dry. Cycle time sec. 3.3
General
Motor (Standard) HP/ (kw) 40 / (30)
Servo Motor Pump (YUKEN ES) kw 20(M)/37(D)
Oil tank capacity L 245
Hydraulic sys. Pressure Psi 2417
Machine weight U.S. ton 5.952
Machine size (LxWxH) in 207.4 x 58.54 x 90.11
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.

VsP-220

Injection Unit
Injection unit size G F
Screw Diameter in 1.41 1.57 1.81 1.81 1.96 2.16
Calculated Injection Capacity in³ 9.94 12.2 16.2 20.2 23.9 28.9
Actual Shot weight-PS g 153 188 249 312 368 445
oz 5.4 6.6 8.8 11.0 13.0 15.7
Actual Plasticzing Capacity-PS g/s 20.55 27.50 40.27 26.94 33.61 41.66
Actual Plasticzing Capacity-PS kg/hr 74.00 99.00 145.00 97.00 121.00 150.00
Injection Pressure-Max. Psi 30991 27976 21149 32001 27080 22387
Injection rate in³/sec 11.04 13.67 18.06 11.90 14.09 17.02
Calculated Injection Speed-Max. in/sec 7 4.64
L/D ratio 22.2 20 17.4 21.7 20 18.2
Screw Speed rpm 391 261
Screw stroke in 6.299 7.874
Calculated Nozzle contact force U.S. ton 5.5 5.5
Total Heating wattage kw 13.9 22.6
Clamping unit
Clamping Force U.S. ton 242.5
Tie-Bar distance (HxV) in 22 x 22
Mold thickness Min. – Max. in 7.87 – 23.62
Clamp stroke-Max. in 20.078
Open daylight-Max. in 43.7
Platen dimensions (HxV) in 31.29 x 30.66
Ejector stroke in 5.905
Ejector force U.S. ton 6.172
Dry. Cycle time sec. 3.5
General
Motor (Standard) HP/ (kw) 40 / (30)
Servo Motor Pump (YUKEN ES) kw 20(M)/37(D)
Oil tank capacity L 245
Hydraulic sys. Pressure Psi 2417
Machine weight U.S. ton 6.834
Machine size (LxWxH) in 218.42 x 58.93 x 92.48
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.

VsP-260

Injection Unit
Injection unit size F E
Screw Diameter in 1.81 1.96 2.16 2.16 2.36 2.67
Calculated Injection Capacity in³ 20.2 23.9 28.9 34.7 41.4 53.2
Actual Shot weight-PS g 312 368 445 534 636 817
oz 11.0 13.0 15.7 18.8 22.4 28.8
Actual Plasticzing Capacity-PS g/s 33.88 41.94 52.22 31.66 39.44 52.77
Actual Plasticzing Capacity-PS kg/hr 122.00 151.00 188.00 114.00 142.00 190.00
Injection Pressure-Max. Psi 32001 27080 22387 29370 24676 19215
Injection rate in³/sec 14.89 17.63 21.29 16.23 19.34 24.83
Calculated Injection Speed-Max. in/sec 5.78 4.4
L/D ratio 21.7 20 18.2 21.8 20 17.6
Screw Speed rpm 327 198
Screw stroke in 7.874 9.448
Calculated Nozzle contact force U.S. ton 5.5 8.7
Total Heating wattage kw 22.6 33.23
Clamping unit
Clamping Force U.S. ton 286.5
Tie-Bar distance (HxV) in 24.2 x 24.2
Mold thickness Min. – Max. in 9.84 – 25.59
Clamp stroke-Max. in 22.834
Open daylight-Max. in 48.425
Platen dimensions (HxV) in 35.03 x 33.85
Ejector stroke in 6.692
Ejector force U.S. ton 9.369
Dry. Cycle time sec. 3.5
General
Motor (Standard) HP/ (kw) 50 / (37)
Servo Motor Pump (YUKEN ES) kw 16+16(M)/22+22(D)
Oil tank capacity L 450
Hydraulic sys. Pressure Psi 2417
Machine weight U.S. ton 10.251
Machine size (LxWxH) in 249.21 x 62.28 x 94.01
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.
Go to Top